Brazil NR-12 Aerial Work Platform: What Buyers Actually Need to Check
A Brazil NR-12 aerial work platform does not need an INMETRO certificate before import. That claim is repeated across supplier brochures and freight-forwarder checklists, but it does not survive a check of the underlying regulations. Brazil has no import-side certificate for MEWP that works like Nigeria’s SONCAP or Kenya’s PVoC. The obligations that matter sit on the use side, under Brazilian labour law and technical standards.
This matters because the wrong assumption cuts both ways. A buyer who chases a certificate that does not exist wastes weeks before shipment. A buyer who concludes that “no certificate” means “no requirements” arrives with a machine the local operator cannot legally use. Both outcomes are avoidable once the documents are separated.
The short answer
For scissor lifts, vertical mast lifts and boom lifts entering Brazil:
- There is no import-side mandatory certification for industrial MEWP comparable to SONCAP or PVoC.
- The controlling rules are NR-12 (machine safety), NR-18 (construction) and NR-35 (work at height), plus the technical standard ABNT NBR 16776 for MEWP design and manufacture.
- The obligations fall mainly on the Brazilian employer or operator, not on an export-stage certificate issued by the manufacturer.
- INMETRO’s platform-lift rules cover public-transport vehicle lifts, not industrial MEWP.
- A CE mark does not by itself make a machine NR-12 compliant. The two regimes are not mutually recognised.
Where the INMETRO claim comes from
The confusion is traceable and specific. Two INMETRO ordinances are repeatedly cited as proof that aerial platforms need certification in Brazil: Portaria 642/2012 and Portaria 164/2015.
Read the source, and both are about vehicles. Portaria 642/2012 was notified to the World Trade Organization under G/TBT/N/BRA/495 as conformity assessment procedures for “lifting platforms used in urban public transport with a focus on safety and accessibility needs.” Portaria 164/2015 concerns vehicle platform lifts for vehicles with road characteristics. A related instrument, Portaria 588/2012, was notified under G/TBT/N/BRA/488 as compulsory certification of “vehicle platform lifts for vehicles intended for the public transport of passengers.”
None of these describe a self-propelled scissor lift, a vertical mast lift or an articulated boom lift used in a warehouse, a plant or on a construction site. They describe lifts that carry passengers in public transport settings. An industry risk-classification table lists the first two under “plataforma elevatória veicular” — vehicle platform lift — inside INMETRO’s compulsory assessment scope. That is the category that got misread as “any aerial work platform.”
The result is a classic citation drift: a rule about accessibility lifts for buses and transit stations gets shortened to “INMETRO certifies platforms,” then handed to buyers as “your MEWP needs INMETRO.” It does not.
The second mix-up: NR-12 Annex XII
There is a second, narrower error worth clearing up, because it catches buyers who have already corrected the first one.
NR-12 Annex XII is often presented as the chapter that governs all aerial work platforms. Its definitions say otherwise. The annex covers three kinds of equipment: the aerial basket (a vehicle-mounted boom with a bucket), the mounted basket (a bucket attached to a vehicle crane) and the suspended basket. Its insulation classes reference ABNT NBR 16092 and NBR 14631 for live-line work.
These are vehicle-mounted and suspended access devices. A self-propelled scissor lift or a mast lift is not any of them. Annex XII is real and it is mandatory where its equipment applies — but it is not a blanket rule for every machine that lifts a person. Treating it as one is the second misreading, and it tends to produce the wrong checklist.
What actually governs an industrial MEWP in Brazil
Strip away the two misreadings and a coherent framework appears.
| Instrument | What it covers | Who carries the obligation |
| NR-12 | Machine safety across design, import, sale, use and transfer; amended by MTE Ordinance 344/2024 (consolidating SEPRT 916/2019) | Brazilian employer / importer |
| NR-12 Annex XII | Vehicle-mounted and suspended baskets for lifting people | Operator of that equipment |
| NR-18 | Construction-site conditions; updated 2021 to define MEWP and set inspection, maintenance, ground and operator rules | Construction employer |
| NR-35 | Work at height above 2 m — risk analysis, work permit, training, fall protection, rescue | Employer |
| ABNT NBR 16776 | MEWP design, manufacture, maintenance, safety requirements and test methods | Manufacturer / importer, via contract and technical file |
Two points deserve emphasis.
First, the employer carries most of the legal duty. NR-35 requires a risk analysis, a work permit, trained and qualified operators, fall protection and an emergency rescue procedure for work above two metres. NR-18 adds site-specific inspection and maintenance rules for MEWP used in construction. These are obligations of the party using the machine in Brazil, not a document the overseas manufacturer issues at the port.
Second, ABNT NBR 16776 is a technical standard, not a certificate to hold at customs. It specifies safety requirements and test methods for mobile elevating work platforms. Its current edition should be confirmed against the ABNT catalogue at the time of purchase: sources disagree on the status of the 2025 edition relative to 2019. Do not let a supplier name a version without checking it.
On the version of NBR 16776
This is the one detail where even careful buyers get a conflicting answer, and it comes up on every Brazil NR-12 aerial work platform file. The standard’s publication history includes a 2019 edition and a 2025 edition. One standards database flags the 2025 edition as cancelled and warns against relying on it; another lists 2025 as the current version. We are not going to pick a side in a document we cannot verify first-hand.
The practical guidance is simpler than the dispute. Ask the declaring party or the local conformity professional to state, in writing, which edition they will assess the machine against, and point them to the ABNT catalogue entry. A named edition with a named responsible party is worth more than a version number copied from a broker’s spreadsheet.
CE marking is not a shortcut
Many buyers assume that a CE-marked machine clears the Brazilian file automatically. It does not. NR-12 and the Brazilian standards are a separate regime. A CE declaration supports the machine’s design safety record; it does not replace the Portuguese-language documentation, the local risk assessment or the operator obligations that NR-12, NR-18 and NR-35 place on the Brazilian side.
If a supplier offers “CE = NR-12,” treat it as a question, not an answer. Ask which NR-12 clauses were assessed, who signed the technical file, and whether a locally qualified professional (an ART, or technical responsibility annotation) is needed for the documentation. Our CE compliance guide sets out what the CE route does cover — and where it stops.
What a buyer should actually request
For a Brazil shipment, the useful questions are these:
- Which technical standard is the machine assessed against, and which edition — confirmed in writing by the local party.
- Portuguese-language material — operating manual, safety analysis and maintenance guidance — in a form the Brazilian operator can keep on file.
- A technical file (prontuário) that the employer can present during a labour inspection.
- Operator training and qualification records, since NR-18 and NR-35 place this on the employer.
- A written position on NR-12 Annex XII — whether the machine is a vehicle-mounted basket (in scope) or a self-propelled MEWP (not the annex’s subject).
- HS classification and customs documents, confirmed with the Brazilian broker, kept consistent with the invoice and nameplate.
None of these is an export-stage government certificate. All of them affect whether the machine can be used without interruption once it lands. The Brazil NR-12 aerial work platform question is therefore less about a document to obtain and more about a file to assemble — before the machine ships, not after.
How this compares with other markets
Brazil is not an outlier. Markets differ in where they place the burden. Nigeria SONCAP certification for aerial work platforms and Kenya’s pre-shipment PVoC route put a document in the exporter’s hands before sailing. The United States, under ANSI A92 for aerial work platforms, relies largely on voluntary consensus standards and employer obligations rather than an import certificate. Brazil sits closer to the US pattern than to the African pre-shipment regimes — which is precisely why a buyer working from a SONCAP-shaped checklist gets the wrong answer.
The detail that changes the purchase is rarely the certificate. It is the documentation language, the responsible local party and the operator obligations. Settle those before the machine ships.
Frequently Asked Questions
Does a Brazil NR-12 aerial work platform need an INMETRO certificate? No. INMETRO’s platform-lift ordinances (Portaria 642/2012, 164/2015 and the related 588/2012) cover public-transport vehicle lifts, not industrial MEWP. There is no import-side INMETRO certificate for a scissor, mast or boom lift.
Which rules actually apply to an industrial MEWP in Brazil? NR-12 for machine safety, NR-18 for construction use, NR-35 for work at height, and ABNT NBR 16776 for MEWP design and test requirements. The duties fall mainly on the Brazilian employer or operator.
Does NR-12 Annex XII cover scissor lifts? No. Annex XII defines aerial, mounted and suspended baskets — vehicle-mounted or suspended access equipment. A self-propelled scissor lift or mast lift is not its subject.
Is a CE mark enough to show NR-12 compliance? No. CE and NR-12 are separate regimes. A CE declaration supports design safety but does not replace Portuguese documentation, the local technical file or the operator obligations under Brazilian law.
Which edition of ABNT NBR 16776 applies? Confirm the current edition against the ABNT catalogue and have the local conformity professional name it in writing. Published sources disagree on the status of the 2025 edition relative to 2019.

Official References
- World Trade Organization — G/TBT/N/BRA/495/Add.1, Portaria INMETRO 642 of 30 November 2012 (lifting platforms for urban public transport), official notification PDF (ALADI archive): https://www2.aladi.org/nsfaladi/normasTecnicas.nsf/ccc11adff39a6a9403257cf600683dc4/dc8ed83eaae6683c03257bf000588436/$FILE/Not%20642.pdf
- World Trade Organization — G/TBT/N/BRA/488/Add.1, Portaria INMETRO 588 of 5 November 2012 (vehicle platform lifts for public transport): https://www.tbtguide.com/c/mypt/gwxw/12628.jhtml
- Brazilian NR (English translation) — NR-12 full text, Annex XII, amendment record (MTE 344/2024): https://www.braziliannr.com/brazilian-regulatory-standards/nr12-machinery-and-work-equipment-safety
- Brazilian NR (English translation) — Annex XII of NR-12, definitions and insulation classes: https://braziliannr.com/brazilian-regulatory-standards/nr12/nr12-machinery-and-work-equipment-safety/annex-xii-of-nr12-hosting-equipments-for-lifting-people-and-working-at-height/
- ABNT NBR 16776 — publication history and status (MEWP design, manufacture, maintenance, safety, test methods): https://www.normas.com.br/visualizar/abnt-nbr-nm/12555/abnt-nbr16776-plataformas-elevatorias-moveis-de-trabalho-pemt-projeto-fabricacao-manutencao-requisitos-de-seguranca-e-metodos-de-ensaio
Editorial note: This article describes how Brazilian requirements for aerial work platforms are organised and is not legal advice. Confirm the applicable standards, documentation and conformity route with MTE, ABNT and your Brazilian customs broker before relying on it for a shipment.
