Vertical
Mast Lift
Single and double-mast lifts for tight indoor spaces. CE certified for European markets.
Boom Lift
Series
Articulating and telescopic boom lifts for reaching beyond vertical. Diesel and battery powered for outdoor construction and infrastructure.
Loading
Dock
Dock levelers, mobile ramps and boarding bridges for smooth truck-to-warehouse transfers in logistics hubs and cold storage.
Lift
Table
Stationary hydraulic lift tables for factory floors and production lines. High stability, anti-skid platform, fully customisable sizes and capacities.
Find the lift that fits
your job site.
Six work profiles — metro & rail, low-level access, warehouse picking, reach over obstacles, loading dock and everything else. Pick the one that matches your site, then see the Chenlift series built for it.
Tunnels and live lines leave no room for a standard access machine.
Width, weight, power and travel mode are fixed by the tunnel before the machine arrives. Once a lift fits the route, it can handle catenary, tunnel lining, platform and train-side work inside a tight possession window.
- Tunnel-width compliance
- Travel mode: steel-wheel vs crawler
- Power source on site
- Gradeability & hoisting need
The job is only a few metres up, and it happens where people work.
Facility teams, HVAC and electrical contractors, malls, hotels, schools and data centres repeat the same short tasks every day — lamps, cable runs, signage, filters, ceiling voids. A ladder carries the person but not the tools, and it puts the risk on the floor and the public below it.
- Working height band (5–6.5 m)
- Floor load & tyre marks
- Door and lift width
- Transport between sites
The aisle is narrow, the audit is strict, and picking cannot stop.
Warehouse equipment dealers, automation integrators, e-commerce and retail distribution centres, pharmaceutical and food plants, and rail depots all run into the same constraint: narrow aisles, continuous picking, and — in controlled zones — zero tolerance for hydraulic oil.
- Aisle width & turning
- Picking height & frequency
- Oil-free requirement
- Floor, noise & emission limits
MG is supplied market by market — destination-country tariffs, local certification and channel coverage decide where it can be offered. Send us the country and we confirm availability before you quote your customer.
The load has to go up, over or around something — and stay there.
HVAC and M&E installation, ductwork, glazing and panel work, industrial maintenance, airports and stations, in-warehouse equipment service. A standard scissor lift or straight mast arrives at the wrong angle, has no way to hold the piece, or cannot be placed at all.
- Lifting height & load shape
- Outreach or offset needed
- Power available on site
- How the piece is held
Every truck arrives at a different height, and every delay holds up the bay.
Distribution centres, cold stores, factories, industrial door contractors and warehouse engineering firms fight the same bottleneck: the gap between truck bed and floor, and everything around it — door, shelter, restraint and the traffic schedule behind them.
- Truck-bed range
- Bay & pit dimensions
- Axle load rating
- Door, shelter & restraint scope
Other work we configure for.
Not every job fits five profiles. These are the remaining application pages — each with its own model list, configuration notes and the compliance that applies in your market.
machine
Four Work Profiles.
Four Series.
HA14J electric boom, MD oil-free vertical lifts, MX MINI scissor and MG drivable mast — four representatives, each answering a different work envelope. Use the full specifications to verify fit against your site, load and operating requirements.
Electric Articulating Boom Lift
A 16 m electric articulating boom lift for construction and industrial maintenance, with 230 kg platform capacity and 7.5 m working radius.
- Working Height
- 16 m
- Platform Capacity
- 230 kg
- Working Radius
- 7.5 m
- Drive
- Electric
Full-Electric, Oil-Free Vertical Lifts
No hydraulic oil in the lifting system — full-electric, oil-free access for clean rooms, food, pharmaceutical and cold-chain work. Self-propelled MD390-2 and MD570, plus the MD390OP order picker.
- Models
- MD390-2 · MD570 · MD390OP
- Working Height
- 5.85 – 7.7 m
- Lifting System
- Full-electric · no hydraulic oil
- Tallest Model
- MD570 · 7.7 m · 200 kg
Mini Self-Propelled Scissor Lift
Three models covering 5 m to 6.5 m working height. Asynchronous AC motor, proportional control, drivable at full height and automatic pothole protection for warehouses, factories and light construction access.
- Models
- MX300S · MX390S · MX450S
- Working Height
- 5 – 6.5 m
- Load Capacity
- 240 kg
- Power Source
- 2×12V/114Ah
Drivable Vertical Mast Lift
Four models from 8 m to 11 m working height with proportional control, automatic brake and compact 0.79–1.0 m stowed width for narrow aisles and maintenance work.
- Models
- MG600-1S – MG900-2S
- Working Height
- 8 – 11 m
- Load Capacity
- 125 – 200 kg
- Stowed Width
- 0.79 – 1.0 m
Aerial Work Platforms
& Material Lifting Products
Start with the product family that fits your market, project type or rental fleet requirement.
What We Have Built
We present Chenlift on the homepage through capability, not factory size. This section is meant to answer what we can support and how we work.
Manufacturing Experience
Over two decades of manufacturing know-how across aerial work platforms, material lifting equipment and project-based configurations.
Engineering Capability
Continuous product development, technical refinement and configuration support for distributors, rental fleets and OEM projects.
Quality System
CE documentation, ISO 9001 workflow, testing and inspection built into the manufacturing and delivery process.
International Business
Market-facing support across 80+ countries, including distributor cooperation, rental fleet support and documentation readiness.
How We Control Quality From Sourcing to After-Sales
Reliable delivery is built long before final inspection. From sourcing and production control to shipment checks and after-sales support, we manage each stage to help partners reduce risk and serve their markets with confidence.
Material Sourcing Control
Supplier selection, incoming checks and purchasing discipline to support stable manufacturing quality.
Production Process Control
Manufacturing steps monitored through process management, assembly standards and repeatable workflow.
Warehouse & Parts Planning
Organised parts flow and storage management to support production continuity and after-sales readiness.
Quality Assurance System
Testing, inspection records and quality procedures connected to CE documentation and ISO 9001 workflow.
Pre-Shipment Inspection
Machine testing before dispatch, with support for third-party inspection when requested by the customer.
After-Sales Support
Spare parts planning, technical response and service follow-up to support long-term equipment operation.
Buying Chenlift
in Your Market
Start with the market that matches your project. Each guide covers local compliance, documentation expectations, product fit and export planning.
Vietnam · Turkey
& More →
How We Grow With Our Partners
We believe long-term cooperation is built on more than supplying machines.
It requires engineering support, product improvement, spare parts planning, technical training and continuous market understanding.
As our international business has continued to grow, we have also continued to strengthen our engineering and manufacturing resources through deeper industrial collaboration.
Today, our technical teams, manufacturing resources and quality systems work on a broader platform, allowing us to provide customers with stronger product capability, broader product coverage and more stable long-term support.
Documentation, market understanding and long-term cooperation support for growing dealer networks.
Model selection, repeat order consistency and stable support for fleet deployment and service needs.
Branding, configuration, specifications and product adaptation for partner-led market development.
Technical response, parts coordination and operational support designed for long-term cooperation.
What Customers Say
★★★★★"The oil-free drive system proved to be a greater operational advantage than we anticipated. CE documentation was thorough, customs clearance was smooth, and after-sales support has remained straightforward whenever questions came up. We ordered a second batch within the year."
★★★★★"Our standards for third-party equipment are demanding. Chenlift’s scissor lifts passed our internal evaluation on build quality, safety system design and documentation. CE certification held up under scrutiny, and the after-sales team has been responsive every time technical input was needed."
★★★★★"The Chenlift scissor lifts we ordered held up exactly as specified. Delivery was on schedule, and when we had a configuration question after delivery, the technical team answered the same day. That kind of response matters in real procurement work."
What is the minimum order quantity (MOQ)?
Chenlift accepts orders from 1 unit. No minimum for standard models. OEM/custom may vary depending on the request.
Do Chenlift products hold CE certification?
Yes. CE-certified under EU Machinery Directive 2006/42/EC. ISO 9001:2015 quality workflow and model-based CE documents are available on request.
What is the typical lead time?
Standard orders typically ship within 30 days of confirmation and deposit. Custom or larger-volume projects are confirmed case by case in quotation.
Can Chenlift support OEM / custom products?
Yes. Chenlift supports OEM and custom cooperation covering platform dimensions, power systems, colors, branding and project-specific adjustments.
Do you support distributor and rental customers?
Yes. Chenlift works with distributors, rental companies and industrial buyers in different markets, with support that can include documentation, model selection, spare parts planning and technical follow-up.
Is third-party inspection supported?
Yes. Pre-shipment inspection by SGS, Bureau Veritas, TUV and other third-party agencies can be supported when requested.
News & Updates
Ready to Discuss
Your Market or Project?
Talk to the Chenlift team about product selection, market requirements, documentation expectations and quotation support.
- 24-hour quote response
- CE docs and inspection support
- OEM, ODM and distributor enquiries welcome